Northland Marine

Minn Kota 24/36 Volt Maxxum Control Board 2884052

Part Number: 2884052

Old Part Number(s):  2264007, 2264008, 2264009, 2264011, 2264012, 2264038, 2774009, 2774011, 2774514, 2884007, 2884018, 2884038

Minn Kota 24/36 Volt All Terrain/Maxxum Foot Controlled Cable Steer Control Board Upgrade Kit

Fits all 24 and 36 Volt Foot Controlled Maxxum Models from 1998-2005.  The original control board for these models has been discontinued and is no longer available from Minn Kota.  This upgrade kit updates all older models to the most current design.

Thrust levels include models 65-101 pounds. (Also includes early 54# models that are 24 volt)

Serial Numbers will contain the following designations after the MK or WW:

JI, JJ, AA, AB, AC, AD, AE, AF

Parts included with this Control Board Upgrade Kit:

 Quantity Part Number (Old Part Numbers) Part Description
1 2884053 (2264052, 2264054, 2264056, 2344052, 2344054) 24/36v Control Board Assembly
2 2223455 Screw 10-32 x 1/2"
1 2261238 (2261233) 10 GA Battery Lead Wire Assembly
1 2256300 (225630, 2026300, 2056300, 2256301) Zip Tie
1 2774512 (2264510, 2264511, 2774510, 2774511, 2884511) Bottom Plate
4 2265126 Rubber Bumper
4 2378600 Pop Rivet
1 2773705 (2773702, 2993702, 2993705) Push Button/Magnet Assembly
1 2260810 Magnet Reed Clip
1 2994497 (2994496) Foot Pedal Top
1 2302732 Foot Pedal Spring

Installation Instructions

Not included in the instructions, but a necessary step to installing this upgrade kit is to replace the top of the foot pedal.  Use a punch to remove the pivot pin, install the new top and then reinsert the pivot pin.

Is your motor 2006 or newer? 24/36v Control Board Assembly 2884053

Not sure if this control board will fit your motor?  Parts Diagrams.

Customer Reviews

Based on 15 reviews
73%
(11)
27%
(4)
0%
(0)
0%
(0)
0%
(0)
J
Johnny Cantrell (Whitwell, US)
I purchased the Kit to Upgrade My Minn Kota 24/36 Volt Maxxum Control Board & Foot pedal Momentar...

It was a very expensive upgrade coming in right at $300 because I also purchased a new set of steering cables to go with this upgrade kit. However, when your trolling motor is still functioning properly and correctly.... it's still cheaper than buying a newer trolling motor that's a 24/36 volt style. The hardest thing was knocking out the the metal rod that allows foot pedal to pivot. There was not directions or guidance on how to do this included. I just took an old Phillips screwdriver grind it down flat and used it as a punch to knock it out. I hope this helps someone.

m
michael smith (Broken Arrow, US)
Convert analog to digital

I had never worked on a trolling motor before, My vibrable speed switch broke and i had an analog trolling motor. I called and spoke with a very helpful person that hooked me up with the conversion control board and what was needed to do the swap.. It came in it had everything you needed for the conversion simple and quick. The instructions were very easy to understand. Good people and good service.

J
Jeff P (Springfield, US)
Fixed the problem

The installation was pretty easy and fixed my problem of the motor running all the time at high speed. I can’t speak for longevity since I just installed it. The only con is the instructions. The pictures are almost useless since they are black and white.

R
Randal Hanning

very good experience. Kit arrived with instructions and after installed worked great.

C
Corkey G

Original Part was shipped in a timely manner but was lost by Fedex. I contacted Jason Kral
Sales and Parts Manager by email and he put a trace with no results, He then shipped me another one USPS which came in before I was going fishing...Just wanted to thank him for a job well done.

J
John W

Very pleased with the control board kit. Complete and easy to install. Less pleased with the phone call from fedex requiring me to pay an additional 53$, on top of the 81$ that i paid at time of purchase, to complete the delivery. Makes for extremely expensive transport.

J
Jeff C

Everything worked great other than in my case I was sent two sets of instructions that did not match. Once I deciphered the information and after a call to Northland, all was well. It worked great and we are up and running.

C
Cecil J

It all worked out just fine. It was not hard to install . Thanks for your help.

K
Kirk R

I ended up returning it unopened. Nothing wrong with product. I put an ultrex on the boat. I will rebuild the maxxum over the winter.
Customer service was very good. I’ll order parts for #80 upgrade to the maxxum pretty soon.

C
Chris

Awesome sales and service.. Only wish you could give 10 stars because 5 is not enough..
Thank you.

Frequently Bought Together