kit # SSPIVOTPADKIT
by: Minn Kota

Price: $30.00


This part is: In Stock.
Ships from and sold by: Northland Marine, Inc.

Need this part quick?
Choose expeditied shipping options from UPS at checkout. Details
Part Diagram and List for Minn Kota Bow Mount Pivot Pad Kit


Designed for Riptide Motors, but is compatable with most Minn Kota bow mount fresh water motors with electric steering.

Minn Kota Trolling Motor Parts | Repair Parts | PIVOTPADKIT| Minn Kota Bow Mount Pivot Pad Kit
Current Minn Kota part numbers are listed in bold along with part description. Previous part numbers for each part are listed below the current number and are direct replacements.
233-3100 - Speed Nut (4 included)

233-0500 - Latch Pin
2010512

233-0520 - Pivot Pin
230051

230-5103 - Pivot Pad (2 included)
230511
2305101
2305102
2305103
2305110

233-5110 - Pad Suppot (4 included)
230511

Minn Kota Trolling Motor Parts | Repair Parts | PIVOTPADKIT| Minn Kota Bow Mount Stainless Steel Pivot Pad Kit

To view a parts diagram for your motor, click here.
You will need your model's model and serial number.

MINN KOTA TROLLING MOTOR - BOW MOUNT
STAINLESS STEEL PIVOT PAD KIT

Copyright 2011 - Northland Marine, Inc.

Minn kota parts and accessories

Minn Kota Parts Directory

For Parts Information email
parts@northlandmarine.com

For General Information email
info@northlandmarine.com

Northland Marine Store Hours
Other Minn Kota Products of Interest:
Click image to view part page
MINN KOTA | TROLLING MOTOR | PARTS | COMPASS CONTROL BOARD | AUTO PILOT | 2884024
Minn V2 Series Footpedal
Minn Kota Weedless Wedge Prop
MINN KOTA | TROLLING MOTOR | PARTS | CONTROL BOARD | 2884055

Minn Riptide Wireless Copilot
Minn Kota Riptide Quick Release
MINN KOTA
N. & S Hemisphere
AP Compass Board
MINN KOTA
Foot Pedals
MINN KOTA
Props
MINN KOTA
Control Boards
MINN KOTA
Riptide Copilot Wireless Steering
MINN KOTA
Riptide
Quick Release Bracket
MINN KOTA Stainless Steel Pivot Pad Kit
Part# SSPIVOTPADKIT
  • Includes all the necessary parts for changing out the rubber pads that hold the drive housing in place on most electric steer, bow mounts.
  • It is reccommended to replace the pivot and latch pins when replacing the pads as any bend in the pins can cause the pads to wear unevenly. In pre-2001 Power Drives, the latch pin is not be used.
  • These parts are NOT sold individually